Elevate All Purpose Sealant - 10 oz.
AP Sealant is a single-component polyurethane non-sag moisture-curing sealant. It can be used to caulk sheet
metal, masonry, brick, and concrete block. It may be used as an exterior sealant at termination bar details and
as a fastener sealer over fastener heads per current Elevate specifications and details.
Method of Application
1. Surfaces to receive AP Sealant must be clean, dry, sound, frost-free, and grease-free. If grease or oil is
present, it must be removed with a suitable solvent prior to the application of AP Sealant.
2. Apply AP Sealant to substrates above 40 °F (4 °C).
3. AP Sealant is supplied in cartridges or sausage chubs ready to apply. Do not open cartridges until all
substrate cleaning and preparation work has been completed.
4. Fill joints from the deepest point to the surface by holding a properly sized nozzle against the back of the
joint.
5. Dry tooling is recommended.
6. DO NOT use soapy water when tooling.
Storage
Store in original unopened containers at temperatures between 60 and 80 °F (16 and 27 °C).
When exposed to lower temperatures, restore to room temperature prior to use.
For optimum results, rotate stock to ensure stored material has not exceeded the shelf life of one (1) year.
Shelf Life
Shelf life of one (1) year can be expected when stored in original, sealed containers at temperatures between 60 and 80 °F (16 and 27 °C). Shelf life will be shortened if exposed to elevated temperatures.
Brand: Elevate
Weight:
SKU: